Description
Check out the SMOK THALLO-S 100W Pod Mod Kit, featuring a lofty 1-100W range, 5mL refillable pod capacity, and utilizes the SMOK RPM or RPM 2 Coil Series. Constructed from impact-resistant zinc-alloy, the chassis of the THALLO-S Pod Mod offers a durable casing for the single 18650 battery (not included) that powers it. Holding up to 5mL of your favorite formulation, the THALLO-S Pod Mod System utilizes specialized pods to offer compatibility with the RPM or RPM 2 Coil Series, installed in a bottom press-fit manner. Equipped with a 0.96″ TFT Color Display Screen, the SMOK THALLO-S relays important data back to the user for an outstanding experience. SMOK THALLO-S 100W Pod Mod Kit Features: IQ-XS Chipset Dimensions – 123.5mm by 37.7mm by 30mm Single High-Amp 18650/21700 Battery – Not Included Wattage Output Range: 1-100W Firing Speed – 0.001s Zinc-Alloy Chassis Construction Intuitive Firing Button Color Display Screen Two Adjustment Buttons 5mL THALLO RPM Pod Bottom Fill System SMOK RPM2 Coil Series 0.16ohm RPM 2 Mesh Coil – rated for 20-25W 0.6ohm RPM 2 DC MTL Coil – rated for 12-25W Press Fit Coil Installation Magnetic Pod Connection Low Voltage Protection Short-Circuit Protection 8S Cut-Off Protection Temperature Protection MicroUSB Port Available in LEATHER: Leather Brown, Black, Grey, Red, Blue Available in FLUID: Fluid Black Red, Fluid Gold, Fluid Green, Fluid Blue, Fluid 7-Color, Fluid Black Grey Includes: 1 Thallo S Device 1 5mL Thallo RPM2 Pod 1 0.16ohm RPM2 Mesh Coil 1 0.6ohm MTL Mesh Coil 1 Battery Adapter Sleeve 1 Type-C Cable 1 User Manual Make sure to properly prime each coil and pod before use. Warning: If the coils have a sub-ohm resistance, please ensure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connections on any hybrid or hybrid-style device. If you are not familiar or unsure of particular products or setups, please do not use them. Always use proper precautions and handling. Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage from any modification of the batteries, chargers, devices, and other products that we carry in any form or shape, including pack making. ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer), and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly. When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer), and any rechargeable cells, please be cautious and carefully use them as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please ensure that you have great knowledge of all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see any visible damage on the batteries, please do not use them. Always keep, store, and transport the rechargeable cells in a safe, non-conductive container in a controlled environment.
